2003 cr250 compression test

[dozer]

i know this should be in general tech, but i'll get a quicker response here. i'm looking at an 03 cr250 cause i'm done with these 4 strokes. does anybody know what kind of psi i would be looking for on a compression test? thanx.

 

[streaks383]

180-200 is good

 

[baxterj787]

Make sure you hold the throttle wide open during the test. Closed throttle = very LOW readings. 6 - 10 kicks is adequate.

Or you could buy my RM250 (classifieds) and save yourself the trouble...1700