East Central Ohio metal fab.

[4DAIVI PAI2K5]

Any one have a line on a metal shop that can roll bend angle iron into an arc?
Wanting to build the boy a bmx/mtb jump similar to what is at 21st street in Newark. I can do everything but bending the angle.

 

[4DAIVI PAI2K5]

Like these.

 

[Bass 67]

Try H&R Tool in Zanesville. It’s also the Zanesville Bearing building. It’s on Jefferson St. just south of Dutro off Putnam.

 

[BriarcliffMx]

Go to downtown cycles in Newark - Jutt or Cody know the guy who built the Newark BMX park. They might be able to get you pointed in the right direction.

 

[4DAIVI PAI2K5]

Go to downtown cycles in Newark - Jutt or Cody know the guy who built the Newark BMX park. They might be able to get you pointed in the right direction.

That's who I went to first lol. I spoke with the builder over the phone, he said his guy that did it is in PA but said there should be a shop in cbus that can do it.

 

[4DAIVI PAI2K5]

Try H&R Tool in Zanesville. It’s also the Zanesville Bearing building. It’s on Jefferson St. just south of Dutro off Putnam.

I'll check them out, also need to check with Goodman

 

[NQ1965]

It really took me by surprise when they built that jump park. There had been small bike jumps there for years, but looks like they got a pretty fun set up now.

It also surprised the hell out of me with them getting the skateboard park put together at Everett park. And it kind of piss's me off too, because I used to have to drive to Columbus to find places to ride. It's only about 25 years too late!

 

[NQ1965]

Check with Ashcraft Machine shop in Newark. They get odd request job's and may have the setup to roll angle.

 

[4DAIVI PAI2K5]

It really took me by surprise when they built that jump park. There had been small bike jumps there for years, but looks like they got a pretty fun set up now.

It also surprised the hell out of me with them getting the skateboard park put together at Everett park. And it kind of piss's me off too, because I used to have to drive to Columbus to find places to ride. It's only about 25 years too late!

I remember the old 21st street from when I was younger, about the furthest I made it was the third jump in lol. It is pretty sweet now, the new Dirt Jumper I got takes me back 20 years to when I was riding 21st on a BMX bike.

The new skatepark is great too. Millersburg is getting one built by the same company should be done by July.

 

[4DAIVI PAI2K5]

Check with Ashcraft Machine shop in Newark. They get odd request job's and may have the setup to roll angle.

I'll give them a call today.

 

[GeorgiePorgie]

Can do it with wood. Used to have a bad as wood ramp off the end of our dock. Fun times as a kid. Launched the pitter off it too. Metal for sure better can leave it outside

 

[4DAIVI PAI2K5]

Can do it with wood. Used to have a bad as wood ramp off the end of our dock. Fun times as a kid. Launched the pitter off it too. Metal for sure better can leave it outside

He has a wooden box jump with movable wedge, that I built him for his 5th birthday.

 

[NQ1965]

And here's the 21st street jump park under water:

 

[4DAIVI PAI2K5]

Little moist

 

[Ron505]

Here's my old wood ramp/rabbit hut thingy into the pond....circa 1984. Sorry no help on the bending steel.

 

[4DAIVI PAI2K5]

Ramp number one is done. Porter welding in Zanesville did the metal up for me. Should have the dirt landing finished up today or tomorrow.
Got him a Fit bike 18" for his moms, he has a We the people 18" for my house.